Graco 332298B Manuale Utente Scaricare il pdf (Pagina 24)

Pro Model Setup

24 332298B

• An LED flashes under

either MM when pro-

gramming minutes

OR SS when pro-

gramming seconds.

• In SETUP MODE, the

number displayed in

the first field, on the

left side of display

blinks, indicating the

device is ready to pro-

gram the ON Time minutes.

• The total amount of ON Time cannot

exceed 30 minutes. If a value greater

than 30 minutes is entered, the RED

alarm LED lights and the value must

be updated.

If this time does not meet the application needs,

contact Graco Customer Support.

Programming ON Time

NOTE: When programming a time of less than 10 min-

utes you must program a leading zero in the first num-

ber field and press the ENTER button to save the zero

selection.

1. To set the ON Time use the

UP or DOWN ARROW button

to scroll through numerals 0

to 5 until the desired number

appears in the first MM (min-

utes) field.

2. Press the ENTER button to lock in the

selection. The next MM number field to

the right flashes indicating it is ready for

programming.

3. Use the UP or DOWN

ARROW button to scroll

through numerals 0 to 9 until

the desired number appears

in the second MM number

field.

4. Press the ENTER button to lock in the

selection.

The next number field to the right

flashes and the LED lights under SS; indicating it is

ready to program the seconds fields.

5. Repeat steps 1 - 4 to set the SS (seconds) fields.

6. After pressing the ENTER button to set

the last SS field, all the programmed ON

Time information is saved.

The G3 automatically switches to the OFF Time

SETUP MODE.

OFF Time

• The LED next to the clock in the OFF

field lights, indicating you are setting

the OFF Time parameters.

• OFF Time is set in Hours and Minutes

(HH: MM).

• An LED flashes under

either HH when pro-

gramming hours OR

MM when program-

ming minutes.

• In SETUP MODE the

number displayed in

the first field, on the

left side of display

blinks, indicating the

device is ready to pro-

gram the OFF Time hours.

• The total amount of OFF Time must be

at least twice as long as the pro-

grammed ON Time. If a value less

than twice the ON Time is entered, the

RED alarm LED lights and the value must be

updated.

If this time does not meet the application needs,

contact Graco Customer Support.

Programming OFF Time

NOTE: When programming a time of less than 10

hours you must program a leading zero in the first

number field and press the ENTER button to save the

zero selection.

1. To set the OFF Time use the

UP or DOWN ARROW button

to scroll through numerals 0

to 9 until the desired number

appears in the first HH (hour)

field.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Commenti su questo manuale

Nessun commento

Graco 332298B Manuale Utente Pagina 24

Commenti su questo manuale

Prodotti e manuali riguardandi no Graco 332298B